[Fot] Scatter Shields

[Don Marshall]

I have one of Mordy's blankets on my TR-4A.  It's never been tested but I like
having it on there.  It has an added benefit in that at speed any oil lost
from the engine collects in the blanket and then forms a nice puddle on the
ground once I get back to the paddock.  Its been very helpful in chasing my
oil leaks.  Small puddle = normal.  Big puddle = problem.  Don

-----Original Message-----
From: "Henry Frye" <henry at henryfrye.com>
To: fot at autox.team.net
Sent: 7/5/07 12:52 PM
Subject: Re: [Fot] Scatter Shields

I bought one of these and never installed it. Went a different route.

If anyone is interested in buying it, contact me offlist.

-----Original Message-----
From: "MDunst/Gasket Works" <gasket.works at verizon.net>
Cc: "fot at autox.team.net" <fot at autox.team.net>
Sent: 7/5/07 12:03 PM
Subject: Re: [Fot] Scatter Shields

Some several years ago...   I took a TR4 tranny to Diest safety (they have
been making these ballistic fabric scatter shields for years) and had
several made up to fit the TR3/4/6 bellhousing and box.   I can't recall how
many people ordered them .  They were easy to apply and had an SFI
designation.


M. Dunst
www.headgasket.com
Gasket Works USA, LLC
626.358.1616 Voice
626.628.3777 Fax
GMT -8  Pacific
henry at henryfrye.com
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot
ofbracing at nefcom.net
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot