[Fot] Scatter Shields
Bill Babcock
BillB at bnj.com
Wed Jul 4 15:38:23 MDT 2007
What I have is a steel plate in the area next to the flywheel. What I'd like
is a oil and grease resistant kevlar blanket for the entire transmission. But
I'm ok with just the plate and a limited imagination.
-----Original Message-----
From: fot-bounces at autox.team.net on behalf of Cofrog at aol.com
Sent: Wed 7/4/2007 9:41 AM
To: FOT at Autox.Team.Net
Subject: [Fot] Scatter Shields
Earlier this year RMVR had an incident with a flywheel exploding on an MGB.
I had given thought to this danger but had kind of dismissed it. In looking
over the archives, there was some activity regarding scatter shields in 2000
but it seems to have dead ended.
What are you folks using for scatter shields and their source. I see Uncle
Jack has (had) a metal "U" shaped shield that fits around the transmission
cover inside the car. Others feel that the shield needs to wrap around the
whole bell housing. Thoughts?
Thanks,
Dan Forgey
************************************** See what's free at http://www.aol.com.
billb at bnj.com
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot
More information about the Fot
mailing list