[Fot] diff

[Jeff Snook]

Whatever Glen does, it works.  12 years of TR flogging with no problems!!

Jeff Snook
http://www.snooksdreamcars.com
  ----- Original Message -----
  From: Fubog1 at aol.com
  To: gregmogdoc at surfnetusa.com ; billb at bnj.com ; riverside at cedar-rapids.net
  Cc: fot at autox.team.net
  Sent: Friday, January 26, 2007 8:13 AM
  Subject: Re: [Fot] diff


  I generally leave out everything except the axle gears, essentially making
  it a spool. I put a good bevel on the gears to allow a good surface  for the
  weld beads & wedge them tight in the housing so they stay concentric  with
the
  axle centerline during welding. Pre heat & proper cooling will  generally
keep
  things from getting distorted &/or cracked. The TR housing is  pretty stout
  but the spit housing still sometimes warps.
  Glen
  59 degrees in so fla, brrr...
  _______________________________________________
  Fot mailing list
  Fot at autox.team.net
  http://autox.team.net/mailman/listinfo/fot