[Fot] Source needed for single-flare brake lines

[Bill Babcock]

Single flares. In fact there are no double flare 37 degree tools that I
know of.

-----Original Message-----
From: Jack W. Drews [mailto:vinttr4 at geneseo.net]
Sent: Wednesday, January 10, 2007 8:53 AM
To: Bill Babcock; Fubog1 at aol.com; hottr6 at hotmail.com; fot at autox.team.net
Subject: Re: [Fot] Source needed for single-flare brake lines

When you guys use the AN nuts (great stuff, I wouldn't do it any other
way) do you use single flairs or double flares?

At 10:35 AM 1/10/2007, Bill Babcock wrote:
>I could certainly be wrong, it's happened once or twice before, but as
>I understand it the sleeve is intended to apply even compression to the

>flare without twisting it as happens with a single piece nut.
>...........snip_________________
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot

uncle jack



------------------------------------------------
No Virus Found In This Message
Scanned at barracuda.geneseo.net