[Fot] Wheel spacers (was: aluminum hubs)

[Kas Kastner]

Yes, lets hurry to increase the unsprung weight on all four corners, that
should be good for an increase in cornering power. (HAH!!)

Never Be beaten by Equipment
Kas Kastner
  ----- Original Message -----
  From: Bill Babcock
  To: Gasket Works USA
  Cc: fot at autox.team.net
  Sent: Friday, February 09, 2007 9:52 PM
  Subject: Re: [Fot] Wheel spacers (was: aluminum hubs)


  Imagine the flywheel effect. And if they don't work out you can turn
  them into really trick lawn  darts.
  Bill Babcock
  billb at bnj.com

  www.bnj.com Website for Babcock & Jenkins, a direct and interactive
  agency

  www.ponohouse.com  A blog about living and playing in Maui.

  www. AllAluminumTour.com  A blog about racing my vintage car--Peyote,
  and taking it to all the classic North American tracks in Nero--the
  custom airstream trailer I built.





  On Feb 9, 2007, at 1:38 PM, Gasket Works USA wrote:

  > I have made lots of wheel spacers before.  Once a CAD program is
  > made... the rest is cake.  Water jet cuts this like hot knife
  > through butter.  Even depleted Uranium.
  >
  > By the way.  For any racing members I have a special on depleted
  > uranium spacers 2-3" thickness.
  >
  > m
  >
  > M.N.Dunst
  > Gasket Works USA, LLC
  > gmt-8 Pacific time
  > 626.358.1616 voice
  > 626.628.3777 fax
  > _______________________________________________
  > Fot mailing list
  > Fot at autox.team.net
  > http://autox.team.net/mailman/listinfo/fot
  _______________________________________________
  Fot mailing list
  Fot at autox.team.net
  http://autox.team.net/mailman/listinfo/fot