[Fot] Clutch Plate

[fpspitfire at insightbb.com]

I guess I fit in the totally crazy realm then!

The car has changed a bunch since you last saw it Bill!

Aaron Johnson
#87 HP Spitfire 1500
Southern Illinois Region SCCA

----- Original Message -----
From: Bill Babcock <billb at bnj.com>
Date: Thursday, February 1, 2007 15:50
Subject: Re: [Fot] Clutch Plate
To: Ron Jones <earthron at yahoo.com>
Cc: fot at autox.team.net

> Sounds like somebody built a close ratio box in your case. I 
> have one  
> just like that from the esteemed Mr. Prentice. You can get the 
> right  
> plate from a variety of sources. I think it's a GT6 or a 
> Vitesse  
> plate, but my memory sucks. talk to the guys at Moss or Brit 
> Parts  
> Northwest (google them) and I'm sure they'll have what you need. 
> Or  
> go nuts and put in a two plate rally clutch and coaxial 
> actuator.  
> Nah... You'd have to be totally crazy to do that.
> On Feb 1, 2007, at 9:54 AM, Ron Jones wrote:
> 
> > A few months ago I bought a TR4 race car and have run into 
> a  
> > problem. The spline's on the input shaft on the transmission 
> are  
> > 1"  in diameter. The the clutch plates I have for stock 
> TR2,3,4,  
> > and 6 all fit a 1.25 diameter shaft. The transmission case 
> is  
> > stamped CC 80444 and there are additional numbers of 11 RR 
> 77  and  
> > either DB D7 or D3 D7 stamped below the CC#. Any idea what I 
> have  
> > and where I find a Clutch Plate for it?
> >
> >   Ron Jones
> >
> >   '58 TR3A  Disassembled - Last raced 1972
> >   '63 TR4 Race Car
> >
> >   
> > ---------------------------------
> > Looking for earth-friendly autos?
> >  Browse Top Cars by "Green Rating" at Yahoo! Autos' Green 
> Center.> _______________________________________________
> > Fot mailing list
> > Fot at autox.team.net
> > http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot