[Fot] Clutch Plate

[atenglish at mindspring.com]

Ron,
The good news is you have a set of close ratio gears in your gearbox. You need a GT6 driven plate (or Volvo 140) Borg and Beck part # HB1515 or Unipart GCP140.
Alan T

-----Original Message-----
>From: Ron Jones <earthron at yahoo.com>
>Sent: Feb 1, 2007 2:54 PM
>To: fot at autox.team.net
>Subject: [Fot] Clutch Plate
>
>A few months ago I bought a TR4 race car and have run into a problem. The spline's on the input shaft on the transmission are 1"  in diameter. The the clutch plates I have for stock TR2,3,4, and 6 all fit a 1.25 diameter shaft. The transmission case is stamped CC 80444 and there are additional numbers of 11 RR 77  and either DB D7 or D3 D7 stamped below the CC#. Any idea what I have and where I find a Clutch Plate for it?
>   
>  Ron Jones
>   
>  '58 TR3A  Disassembled - Last raced 1972
>  '63 TR4 Race Car
>
> 	 
>---------------------------------
>Looking for earth-friendly autos? 
> Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.  
>_______________________________________________
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot