[Fot] Stepped Triple Manifold for Webers on a GT6

Scott Janzen S.Janzen at comcast.net
Tue Dec 18 19:45:03 MST 2007


I just picked up a GT6 that was hillclimbed and autocrossed.  It came with 
spares including a head with the TriumphTune stepped manifolds  bolted on, 
same as I have installed on my car.  They don't appear to have ever been 
used but have been sitting on the floor of an unheated garage for about 20 
years.   They could use a good cleaning/beadblasting but are otherwise fine. 
Linkage is incomplete but Pierce Manifolds sells everything you need.  Make 
me an offer!
Scott Janzen, Philadelphia area
----- Original Message ----- 
From: <N197TR4 at cs.com>
To: <fot at autox.team.net>
Sent: Tuesday, December 18, 2007 8:14 PM
Subject: [Fot] Stepped Triple Manifold for Webers on a GT6


> Guys,
>
> John McCue is looking for subject parts....can anyone help?
> His eMail address is:   slugthemtrhd at suddenlink.net
>
> Thanks,
>
> Joe A
>
>
>> Looking for the stepped triple manifold for Webers on a GT6.  I have the
>> straight one for TR6.  Have any ideas who might have one?  Thanks, John
>>
>
>   </HTML>
> Return-Path: <slugthemtrhd at suddenlink.net>
> Received: from rly-dc06.mx.aol.com (rly-dc06.mail.aol.com
>  [172.19.136.35]) by air-dc10.mail.aol.com (v121.4) with ESMTP id
>  MAILINDC101-b254768529c59; Tue, 18 Dec 2007 18:07:22 -0500
> Received: from omta01.suddenlink.net (omta01-pub.suddenlink.net
>  [208.180.40.73]) by rly-dc06.mx.aol.com (v121.4) with ESMTP id
>  MAILRELAYINDC061-b254768529c59; Tue, 18 Dec 2007 18:07:08 -0500
> Received: from johnkbv4bfa8sa ([75.108.225.18]) by omta01.suddenlink.net
>  (InterMail vM.7.05.02.03 201-2174-114-109-20070208) with ESMTP id
>  <20071218230704.WFIH19462.omta01.suddenlink.net at johnkbv4bfa8sa> for
>  <N197TR4 at cs.com>; Tue, 18 Dec 2007 17:07:04 -0600
> Message-ID: <000c01c841ca$b77a3d60$12e16c4b at johnkbv4bfa8sa>
> From: "John McCue" <slugthemtrhd at suddenlink.net>
> To: <N197TR4 at cs.com>
> References: <cfa.23a5c9bc.3490a563 at cs.com>
> Subject: Re: Triumph Aluminum Plates
> Date: Tue, 18 Dec 2007 18:07:09 -0500
> MIME-Version: 1.0
> Content-Type: text/plain; charset="us-ascii"
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook Express 6.00.2900.3138
> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
> X-AOL-IP: 208.180.40.73
> X-AOL-SCOLL-AUTHENTICATION: listenair ; SPF_helo : n
> X-AOL-SCOLL-AUTHENTICATION: listenair ; SPF_822_from : n
> X-Converted-To-Plain-Text: from multipart/alternative by demime 1.01d
> X-Converted-To-Plain-Text: Alternative section used was text/plain
>
> Looking for the stepped triple manifold for Webers on a GT6.  I have the
> straight one for TR6.  Have any ideas who might have one?  Thanks, John
>  ----- Original Message -----
>  From: N197TR4 at cs.com
>  To: slugthemtrhd at suddenlink.net
>  Sent: Tuesday, December 11, 2007 9:45 PM
>  Subject: Re: Triumph Aluminum Plates
>
>
>
>
>
>
>    Have all of Kastners stuff and have talked to Steve Smith from the west
> coast a couple of times.
>
>
>  Do you have Kas' latest three publications (books)?
>
>  I sell them for him and have all three in stock.
>
>  Regards,
>
>  Joe
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot



More information about the Fot mailing list