[Fot] Adjusting valves

[Bill Babcock]

If the cam is ong duration you probably need at least .015" clearance. I use
.022" intake and .025" exhaust on Peyote.


-----Original Message-----
From: fot-bounces+billb=bnj.com at autox.team.net on behalf of jim hearn
Sent: Fri 8/24/2007 1:30 PM
To: FOT at autox.team.net
Subject: [Fot] Adjusting valves

It has been suggested to me that the valves on my '74 TR6 may need other
than the stock settings since it has a hotter cam.  I don't know what the
cam is but it is definitely a hotter cam.  I have only had the car a short
time so my primary mission is to make sure there are no extraordinarily
tight or loose valves.  May be I could get a feel for the general settings
and take any tight or loose ones to that settings.

[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
billb at bnj.com
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot