[Fot] Reinserting TR4 tappets w/head on?

[JHOUATHOME at aol.com]

I've had this happen several times.  I use an old push-rod for  this.  Just 
line up the offending lifter, insert the rod, wiggle it around  a bit, and tap 
GENTLY to get it back in the bore.  Never fails and using  the lifter insures 
that the inside of the tappet will not be harmed!  Good  luck.
John



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour