[Fot] Those bare metal Triumph accelerators

[BillDentin at aol.com]

In a message dated 08/11/2007 11:02:38 AM Central Daylight Time, 
jimhearn1 at comcast.net writes:


> Has anybody successfully addressed those bare metal Triumph accelerators?  
> I
> was thinking of gluing on to the face of the accelerator some rubber or
> maybe some abrasive cloth.  I thought I would see if anyone had come up with
> a good match here.  Jim in Sacramento
> 

Jim...

Most hardware stores sell abrasive strips used to make stair treads non-slip. 
 You can cut them to size and apply them easily (they come with pressure 
sensitive adhesive).  At least that's what we did.

Bill Dentinger



**************************************
 Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour