[Fot] GT6 Header

[Barr, Scott]

<< my question is "how early is early? >>

I'm not certain of it, but it may be for the Mk I head (pre-TR250, I
believe) - the one with the exposed pushrod tubes.   The stud-holes at
the outer ends of the header (fore and aft) are at 3 o'clock and 9
o'clock, rather than being diagonally oriented across those ports.  I
checked it against one of my later GT6 heads.  That later head had the
stud-hole at 1 o'clock in the case of the port for #1 cylinder's exhaust
valve.

Scott B.

________________________________

From: KEVIN LYNCH [mailto:klynch_6 at msn.com]
Sent: Monday, August 06, 2007 8:20 PM
To: Joseph Siam; fot at autox.team.net; Barr, Scott
Subject: Re: [Fot] GT6 Header


Scott, guess my question is "how early is early? Sort of unlikely anyone
would want a Mk1 head.   Especially for racing purposes?  <grin>
During the winter Joe, there was talk of a few of us having a couple
made.  Nothing in stone but will keep ya posted.  kevin

	----- Original Message -----
	From: Barr, Scott <mailto:sbarr at McCarty-Law.com>
	To: Joseph Siam <mailto:jsiam1 at earthlink.net>  ;
fot at autox.team.net
	Sent: Monday, August 06, 2007 6:06 PM
	Subject: Re: [Fot] GT6 Header

	And it turns out that I may have a header for an early GT6 head,
if
	anyone's interested.

	Scott B.

	-----Original Message-----
	From: fot-bounces+scott.barr=mccarty-law.com at autox.team.net
	[mailto:fot-bounces+scott.barr=mccarty-law.com at autox.team.net]
On Behalf
	Of Joseph Siam
	Sent: Monday, August 06, 2007 6:54 PM
	To: fot at autox.team.net
	Subject: [Fot] GT6 Header

	Hi All I am still looking for a GT6 header.  thanks   Joe
	scott.barr at mccarty-law.com
	Fot mailing list
	Fot at autox.team.net
	http://autox.team.net/mailman/listinfo/fot
	_______________________________________________
	http://www.team.net/donate.html

	klynch_6 at msn.com
	Fot mailing list
	Fot at autox.team.net
	http://autox.team.net/mailman/listinfo/fot