[Fot] SCCA Archives (now bore size)

[Tony Drews]

If my calculations are correct, based in 1.2 HP per cu in, 89 MM 
would make 6.7 HP more than 87 MM.  92 MM would make 17.3 HP more than 87 MM.

I'm not sure I could feel 6 HP.  I could probably feel 17, 
though.  I'm still going to run the 87's...

- Tony

At 01:49 PM 12/23/2006, Kas Kastner wrote:
>Easy to calculate how much more power from the big oversize's.  Figure about
>1.2 horsepower for each cubic inch increase. Not nuts on accurate, but close
>enough for holiday gripping.
>
>Never Be beaten by Equipment
>Kas Kastner