[Fot] water in the oil

[Ed Diehl]

Hi, Ken. Some pretty good advic from those guys. I think we discussed the figure 8 gakets once before. Sounds like a likely prospect. See ya tomorrow? Cheers, Ed.

KENMUN at aol.com wrote:  fot, i need advice on fixing a problem of water in the oil in my tr3 vintage 
racer. the problem began when i milled the head to increase the cr to 10.5/1. 
advice at the time was that i needed the steel head gasket. i've tried 3 
different composite head gaskets and 2 configurations of steel gasket. in one 
degree or another the problem returns after a very short time of running. i've also 
tried all brands of head/ head gasket repair products. the liners stand above 
the block around.002/.005".in desperation i returned to a stock head and 
gasket. the problem is still there. i know the modified head was a prime suspect 
but,what are other ways for water to get into the oil and how would know? 
thanks, ken m.
_______________________________________________
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot



Ed Diehl
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com