[Roadsters] OT - Rust Treatment & Paint?

Pat Horne patintexas at icloud.com
Sun May 10 11:44:58 MDT 2020


I’ve used ospho on the Exterior steel stairs I built in 2005. I then painted over it with red metal primer. The steel was new but had some rust & scale on it that I wire wheeled. Haven’t had any problems with rust, though I did just repaint to change color. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On May 10, 2020, at 12:34 PM, Ronnie Day via Datsun-roadsters <datsun-roadsters at autox.team.net> wrote:


I'm cleaning up and rebuilding a locally built, wood decked utility trailer. Typical angle iron/tube frame construction. The original paint is worn, a lot, and there's considerable surface rust. I took it to the quarter car wash and cleaned it up as best I could.

I'm not inclined to have the whole thing media blasted so the plan is, doing a section at a time, to use wire brushes and a detail sander to remove as much of the loose paint as I can, and then hit that area with rattle can primer/paint to "seal/convert" the rust I can't get off, then move to the next section.

Realizing there are products out there that supposedly work like magic, what actually does a decent job? I'm looking for durability and protection, not a car show finish.

RD
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/datsun-roadsters http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/datsun-roadsters/patintexas@icloud.com




More information about the Datsun-roadsters mailing list