[Roadsters] Minimum rotor thickness

[DatsunParts.com, Inc.]

You are welcome. Yes it is .370

Dean

On Tue, Jul 14, 2020 at 3:30 PM Pete Peters via Datsun-roadsters <
datsun-roadsters at autox.team.net> wrote:

> I believe you’re correct. I just double-checked my new dba rotors, and
> they’re stamped with:
>
>
>
> “MIN TH  9.4 MM”
>
>
>
> 9.4mm = 0.370in
>
>
>
> I’ll send in a correction to Steve.
>
>
>
> Thank you, Dean!
>
>
>
> Pete
>
>
>
> *From:* DatsunParts.com, Inc. <datsunpartsdotcom at gmail.com>
> *Sent:* Sunday, July 12, 2020 10:20 AM
> *To:* Pete <ppeters914 at comcast.net>
> *Subject:* Re: [Roadsters] Brake Problem
>
>
>
> .375 is minimum. No way that rotors are good for only .020 turning during
> their lifetime.
>
>
>
> -----Original Message-----
>
> *From:* Pete <ppeters914 at comcast.net>
> *Sent:* Sunday, July 12, 2020 10:10 AM
> *To:* datsun-roadsters at autox.team.net
> *Subject:* Re: [Roadsters] Brake Problem
>
>
>
> I posted it in an earlier response to this thread. From the 311s.org
> TechWiki:
>
>
>
> *“New rotors are approximately .433 inches thick with a minimum thickness
> of.413 inches.”*
>
>
>
> Pete
>
>
>
> Sent via BlackBerry Hub+ Inbox for Android
> <http://play.google.com/store/apps/details?id=com.blackberry.hub>
>
>
>
> -----Original Message-----
>
> *From:* datsun-roadsters at autox.team.net
>
> *Sent:* July 12, 2020 9:37 AM
>
> *To:* patintexas at icloud.com; dave at ranteer.com
>
> *Reply-to:* hrhaslett at yahoo.com
>
> *Cc:* datsun-roadsters at autox.team.net
>
> *Subject:* Re: [Roadsters] Brake Problem
>
>
>
> Definitely measure the rotor thickness, likely they need replacing. Not
> sure the spec on them. Anyone know?
>
>
> ________________________________________
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20200714/5658c382/attachment.htm>