[Roadsters] Clutch pedal bite point adjustment

[Gordon Glasgow]

The adjustment is on the rod that goes into the slave cylinder. Disconnect the spring first. I usually set mine so that there is just a tiny bit of free play between the rod pivot and the clutch arm.

 

Don’t forget to reconnect the spring when you are done.

 

Gordon Glasgow

 

From: Datsun-roadsters [mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of rwm--- via Datsun-roadsters
Sent: Sunday, April 02, 2017 6:03 PM
To: datsun-roadsters at autox.team.net
Subject: [Roadsters] Clutch pedal bite point adjustment

 

Just replaced clutch master, slave, flexible line, return springs, due to deterioration, leaks and fluid contamination. Hardware is Nissan OEM.

 

The clutch pedal that since 1980 released and bit in the last/bottom quarter of clutch pedal travel now releases and bites in the first/top quarter.

 

How do I adjust the bite point back to what I am accustomed? 

 

Thanks.

 

Bob Mann, ’68 2000 Solex

 

Sent from my Windows 10 phone

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20170403/b49f2a68/attachment.html>