[Roadsters] '68-'70 Hood Scoop Stainless Trim Removal?

[RWM]

Thanks, Joe.

- Bob


On 2/18/2016 9:54 PM, Joe Russo wrote:
> Use a soft wooden drift and gently tap it off moving across the length 
> in measured distances. Take it slow in light taps with a soft face 
> hammer. I think there are for clips..maybe five.
>
>
> Joe
>
> On Feb 18, 2016, at 6:13 PM, Roy Haslett via Datsun-roadsters 
> <datsun-roadsters at autox.team.net 
> <mailto:datsun-roadsters at autox.team.net>> wrote:
>
>> Try to spray in as much wd-40 as you can and let it soak.  Its just a 
>> press on fit so removing requires lots of wiggling to get it loose.
>>
>>
>> ------------------------------------------------------------------------
>> *From:* RWM via Datsun-roadsters <datsun-roadsters at autox.team.net 
>> <mailto:datsun-roadsters at autox.team.net>>
>> *To:* 'Datsun Roadster List' <datsun-roadsters at autox.team.net 
>> <mailto:datsun-roadsters at autox.team.net>>
>> *Sent:* Thursday, February 18, 2016 1:37 PM
>> *Subject:* [Roadsters] '68-'70 Hood Scoop Stainless Trim Removal?
>>
>> Any tips and tricks for removal of the stainless trim at the leading 
>> edge of the hood scoop?
>>
>> Trying to get the trim off without bending, creasing, etc.  Don't 
>> care so much about damage to hood, since it's just a trim donor.
>>
>> Thanks.
>>
>> - Bob Mann, '68 2000 Solex

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20160218/abf72899/attachment.html>