[Roadsters] Chain tensioner

[Lennart Bildengjerdingen]

Thank you Jim:-)
Den 06.02.2015 15:50, skrev Jim Svedise:
> Yes there is no oil hole in the H20 pad and also no check valve in the 
> block. The shaft that holds the pad is not centered right for the U20. 
> You can drill the hole and also trim one side of pad but then the 
> chain glides on the pad don't line up with the chain so it's short 
> lived. Stan and Dean both sell the correct new pads.
>
>
>
>
> Jim
> ____________________________________
> Living The Good Life South Of The Border
>
>
>
>
>
> -----Original Message----- From: Lennart Bildengjerdingen
> Sent: Friday, February 6, 2015 1:19 AM
> To: datsun-roadsters at autox.team.net
> Subject: [Roadsters] Chain tensioner
>
> Is there anyone who compared the chain tensioner from H20 13070-32200
> and U20 13070-25500?
> Lennart