[Roadsters] 69 Datsun 2000 Air Conditioning

[Tim .]

Mounts for the pass side of the block.....

I've got two that are not aluminum. And I've had five that were--only two left
as I have sold the others.

I figure one style was for the alt when it was on the pass side and the other
was for the smog pump. Regardless, they both work for whatever you want to put
on the pass side of the engine. I've got the GM one wire alt on the passenger
side and am sure you can put an AC compressor there....regardless of whether
the mount is made from aluminum or iron.

tim

> Date: Fri, 30 May 2014 08:14:18 -0700
> To: aultgc at att.net; cooltchr at adelphia.net; datsun-roadsters at autox.team.net
> From: az589 at lafn.org
> Subject: Re: [Roadsters] 69 Datsun 2000 Air Conditioning
>
> Smog pump mounts were not made from cast iron, they were made from
aluminum.
>
> Stan
> =====
>
> At 10:04 PM 5/29/2014, Gary and Cindy Ault wrote:
> >Kevin,
> >
> >I think you need to start with a smog pump mount -- cast iron.  I
> >wouldn't be surprised to find these are still available from Nissan.  If
not,
> >try Dann at Rallye or Dean at <datsunparts>.  There are plenty of U20s
which
> >have had smog pumps removed, so you should be able to find someone with one
to
> >sell.  Then you improvise.
> >
> >Gary
> >
> >
> >________________________________
> >  From:
> >Kevin B <cooltchr at adelphia.net>
> >To: datsun-roadsters at autox.team.net
> >Sent:
> >Thursday, May 29, 2014 8:09 PM
> >Subject: [Roadsters] 69 Datsun 2000 Air
> >Conditioning
> >
> >
> >Gary, Robert, and Pat - you are right the compressor needs to
> >go on the
> >passenger side, and fortunately my alternator is on the drivers
> >side and I
> >have an extra groove on my water pump pulley.  Alvin, I don't know
> >how to
> >find this information in 311s.org.
> >
> >That being said I believe a Sanden
> >508 v-groove compressor (under $150)  is
> >what I need and a Vintage Air Mark
> >IV Under dash (cost just under $300); as
> >well as a filter and condenser which
> >I believe cost a hundred or so and come
> >in many sizes and can be mounted
> >without much trouble.  I'm not sure how to
> >mount the compressor to the
> >engine.
> >
> >Any ideas how to design a bracket to attach this compressor to the
> >passenger
> >side of a U20? Anyone have a picture of the original smog pump
> >mounted on
> >the passenger side?
> >
> >Thanks again -
> >
> >Kevin
> >Upland, CA