[Roadsters] Fuel bowl

[Pat Horne]

Graeme,

The filter bowl will not fill fully unless you bleed the air out of it. Same
goes for disposable filters, unless the outlet is at the highest point. As
long as fuel flows through the filter having a lower level of fuel in it is
not a proglem.

Peace,
Pat

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of
hrhaslett at yahoo.com
Sent: Sunday, May 11, 2014 11:20 PM
To: Graeme S.; datsun-roadsters at autox.team.net
Subject: Re: [Roadsters] Fuel bowl

I made a new thick cork gasket and pressure B tested the assembly but I
still only get 1/2 the bowl filled with gas. Is that normal?


Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: "Graeme S." <graemes at internode.on.net>
Date: 05/09/2014  6:54 PM  (GMT-08:00)
To: datsun-roadsters at autox.team.net
Subject: Re: [Roadsters] Fuel bowl 
 
Roy, I found that after you THINK you have a nice straight surface on the
alloy housing for the bowl and gasket to seal against, give it the
compressed air test.
Block one of the pipe connections and pressurize the assembly either by
mouth or a bike tyre pump and check for leaks, preferably under water.
If it passes bubbles then it will suck air into the fuel line, not at all
helpful.
I have about 3 alloy fittings and the were all deformed from the tension put
on the alloy by the bowl retaining clamp.

Regards,
Graeme S.

nissanman.shutterfly.com

On 10/05/2014 05:54, Roy Haslett wrote:
> Everyone seems to think the issue is with the bowl lid, not the 
> filter.B  I will disassemble the whole thing, clean it, put it in a 
> new gasket and let you know if it improves. Thanks.
> Roy H.
> 67 1600
>
> On Friday, May 9, 2014 12:52 PM,
> Robert Haug <haugchiro at moscow.com> wrote:
>B B
> Roy, the cork gasket in the fuel
> bowl dries out allowing air to suck into the fuel system.
> It needs to be
> changed.
> I replaced mine with a fuel compliant rubber version and it has  
>worked well since.
> BTW, my gasket was an old inner tube that I cut to fit.
> Bob
> Sent from my iPad
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/datsun-roadsters/graemes@interno
> de.on.net
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/hrhaslett@yahoo.com
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/pat@hornesystemstx.co
m