[Roadsters] early 67 dashboard screws

[Brian Convoy]

Gary is correct. I just replaced mine and they are a 10-32 panhead.  I used
3/4" IIRC.

Sent from my iPad

> On Sep 21, 2013, at 1:34 AM, "Gary and Cindy Ault" <aultgc at att.net> wrote:
>
> Dave,
>
> Are the original screws broken off in the captive nuts mounted in the dash?
As I recall, they're pan head Phillips, probably 8-32 or 10-32.  (Nissan
almost always used fine threads in such applications.  If you can get at one
of the mounting holes, try an 8-32 and a 10-32.  If an 8-32 is too large, try
a 6-32.
>
> Gary
>
> ----- Original Message ----- From: "Dave" <dave at ranteer.com>
> To: "Datsun" <datsun-roadsters at autox.team.net>
> Sent: Friday, September 20, 2013 9:27 PM
> Subject: [Roadsters] early 67 dashboard screws
>
>
>> alas, my organization/filing has let me down.
>>
>> can someone tell me what is supposed to attach the dash cap (the pad that
fits
>> on the dash)?  specifically, I am asking about thread/screw size/type.
Ibm
>> guessing a counter sink head?  philips?  but I canbt tell what size that
>> thread is.
>>
>> thanks!
>> ________________________________________
>>
>> datsun-roadsters at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/briconroy@yahoo.com