[Roadsters] Brakes

[Graeme Suckling]

The recommended order is the farthest wheel from the Master to the 
closest wheel.
For a LHD, that would be RR, RL, FR then FL.

Regards,
Graeme Suckling
http://tinyurl.com/6n5aza
Adelaide
South Australia.


On 14/05/2012 11:59 AM, Larry Dziuba wrote:
> So what is the concensus on order of the brake bleed process after 
> bleeding the master cylinder?  Larry.
> ----- Original Message ----- From: <vulforge at aol.com>
> To: <datsun-roadsters at autox.team.net>
> Sent: Thursday, May 10, 2012 12:08 PM
> Subject: [Roadsters] Brakes
>
>
>> The brakes on these cars are more than adequate IF everything is up 
>> to snuff.
>> Make sure the rubber hoses and pistons are good and
>> flush and bleed the system with the front of the car elevated at least 6
>> inches.  There is a part of the system that will hold a little air if 
>> you
>> bleed with the car level.  Once you get ALL the air out the brakes 
>> work great!
>>
>>
>> Russell Criswell
>> Vulcan's Forge
>> 3936 Broadway
>> Kansas City, MO
>> 64111
>>
>> 816-931-6303
>> 816-931-9378 fax
>> 877-531-1046 toll-free
>> www.vulcans-forge.com
>> ________________________________________
>>
>> datsun-roadsters at autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: 
>> http://autox.team.net/mailman/options/datsun-roadsters/roadster68@shaw.ca
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/datsun-roadsters/graemes@internode.on.net