[Roadsters] Octane
Keith0alan at aol.com
Keith0alan at aol.com
Sun Jan 1 09:57:09 MST 2012
If all is stock then regular will work fine. However, if the head has been
shaved you might need mid grade or even premium. Set the timing to spec,
yours should be TDC unless you have a recurved dizzy. While driving in 3rd
gear at about 2000 rpm floor the gas petal. This is lower RPM and higher gear
that you would normally use. If you get no pinging then advance the timing
a little and try again. You should get a small amount of pinging under a
lugging condition. If it pings like crazy at stock timing then you need to
go to a higher octane.
keith williams
In a message dated 12/31/2011 5:11:55 P.M. Pacific Standard Time,
cp0712 at aol.com writes:
As a new owner I do not know what octane/fuel to burn in my 69 roadster
1600.
Chuck Powell
Jacksonville Fl
Sent from my iPad
________________________________________
datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/keith0alan@aol.com
More information about the Datsun-roadsters
mailing list