[Roadsters] Grant wheel hub

[Mark Sedlack]

there are some pics of one installed on our '66 using a Grant adapter # 4581 
here:
http://www.mildevco.net/grant_wheel.htm

Mark Sedlack
New Franklin, OH
66 1600 http://www.mildevco.net/chevypowereddatsuns/
77 280Z http://www.mildevco.net/chevypowereddatsuns/

----- Original Message ----- 
From: "Gary and Cindy Ault" <aultgc at att.net>
To: "Louie Partida" <lousailor at yahoo.com>; <datsun-roadsters at autox.team.net>
Sent: Wednesday, August 22, 2012 10:08 PM
Subject: Re: [Roadsters] Grant wheel hub


> The correct hub for a '65-'76 roadster is no longer available. But, the 
> hub
> for
> the later cars will work if you trim the shroud which covers the turn
> signal
> mechanism.  The splines are the same.
>
> The current hubs appear to be
> all steel.  The early hubs I have are aluminum.
> The steel hub does work,
> though, and, if the pins are placed correctly, will
> cancal the trun signals
> properly.  Just installed one in my '67--1/2, using a
> spare shroud from a
> correct early adapter kit.
>
> Gary
>
>
>
>
> ________________________________
> From:
> Louie Partida <lousailor at yahoo.com>
> To: "datsun-roadsters at autox.team.net"
> <datsun-roadsters at autox.team.net>
> Sent: Wed, August 22, 2012 7:11:09 PM
> Subject: [Roadsters] Grant wheel hub
>
> Looking for the correct part number for
> a '67 1600.  I thought I had the right
> one, but couldn't make it work. Thanks
> Louie
> ________________________________________
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/datsun-roadsters/msedlack@neo.rr.com