[Roadsters] Fuel/Temp terminal wire colors for 1964 SPL310

[Charles Hubbard]

Can someone please tell me the wiring colors for the 4 terminals on the
heat/fuel, idiot Light gauge on my 1964 SPL310?  I did a lousy job of
labeling my wires and want to ensure that I install it correctly.  There are
only four (4) lug 4 terminals plus a ground.  The gas gauge terminals are
labeled "Tank" and "IGN".  The Temperature terminals are labeled "UNIT" and
"GN".  The four wire colors I think go to these devices are colored:

 

1- red/yellow, 2- green/yellow,  3- yellow,  4- yellow (ugh)

 

I can pull out the old meter and determine if they go to the fuel or temp
sender, but finding the correct terminal is still a 50/50 shot without some
idea of which wire colors go where.  The drawing in the manual does not show
colors.  I was hoping someone had a 64 they could take a look at and tell me
what they see.

 

Charlie Hubbard

1964 SPL310

[demime 1.01d removed an attachment of type application/ms-tnef which had a name of winmail.dat]