[Roadsters] Brake Adjuster Tool

[robert k. smith]

hi,ron, i think you need an 8 point socket.( 4 points make the square,
and will fit the adj.)    have fun,  bob smith, ohio

> Date: Sat, 14 Apr 2012 11:16:32 -0500
> From: ronnie.day at gmail.com
> To: datsun-roadsters at autox.team.net; bluebird510 at googlegroups.com
> Subject: [Roadsters] Brake Adjuster Tool
>
> I'm going to be working on the Roadster this weekend, doing the carpet and
> then the rear brakes. I stopped at the local O'Reilly's looking for a
> socket with a 1/4 square business end to fit the the brake adjuster. No go
> on a specific socket, but I did find a 1/4 allen/hex caliper bit (Lisle
> 12450). It's 3/8 drive so I can just stick a 1/4 x 1/4 drive socket on the
> hex end go to it. I know that using a couple of sockets with a piece of
> allen stock has been suggested before, but this option doesn't require any
> cutting.
>
> FWIW,
> Ron
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/rksmith46@hotmail.com