[Roadsters] Oil Pump Primer

[Roy Haslett]

What I do is pull the coil wire and turn the engine over with the starter
motor, this will pressurize the system somewhat and get the oil around the
engine before you fire it up.  I also run full synthetic oil plus a quart of
Lucas Oil Stabalizer.  Good Luck.
Roy
67 low 1600
________________________________
From: Gary McCormick <gkmcc at sbcglobal.net>
To: Domingo Castilleja <mingocast at gmail.com> 
Cc:
"datsun-roadsters at autox.team.net" <datsun-roadsters at autox.team.net> 
Sent:
Tuesday, April 10, 2012 8:50 PM
Subject: Re: [Roadsters] Oil Pump Primer
You're going to want to get oil to the cam followers, cam, etc.  Only way to
do that is to spin the pump & pressurize the oil system.

Gary McCormick
San
JosC), CA

Sent from my iPod

On Apr 10, 2012, at 7:06 PM, Domingo Castilleja
<mingocast at gmail.com> wrote:

> I am about ready to crank my roadster and I am
wondering if I need to use a
> oil pump primer to route oil thru the engine. I
have oiled the cylinders
> and turned the engine manually and I was wondering
if this is sufficient.
> mingocast
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate:
http://www.team.net/donate.html
> Archive: http://www.team.net/archive
>
Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/gkmcc@sbcglobal.net
________________________________________

datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/hrhaslett@yahoo.com