[Roadsters] Crank Pulley

[robert k. smith]

hi john, well ,you are probably right on the temp. thing.  but ,in practice,
ive never
had trouble loosening some thing ive put red loctite on-- with the exception
of
very small screws, which some times break off.  again, ive never had trouble
loosening any bolts or nuts , 8mm,5/16 or bigger.  hopefully putting the car
in
gear and holding the brakes will work ok.  bob smith


> From: sandhoff at csus.edu
> To: datsun-roadsters at autox.team.net
> Date: Wed, 23 Nov 2011 12:35:25 -0800
> Subject: Re: [Roadsters] Crank Pulley
>
> > if you still cant get the torque high enough, put red lock tite on
> > the threads and get it as tight as you can.
>
> Ummm, this assumes you're never, ever taking it apart again, right?
> Doesn't red loctite require heating to 500 degrees to break the bond?
>
> -- John
> John F Sandhoff sandhoff at csus.edu Sacramento, CA
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/rksmith46@hotmail.com