[Roadsters] clutch hydrolic fluid

[Paul]

  What if the fluid, or sludge as tim calls it, is so thick it doesn't
easily flow back out of the slave when the pedal is realeased?  That would
cause the clutch to slip.

Paul
Ohio

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of Pat Horne
Sent: Wednesday, March 23, 2011 2:56 PM
To: datsun-roadsters at autox.team.net
Subject: Re: [Roadsters] clutch hydrolic fluid

Tim,

Nope, the clutch fluid doesn't get into the clutch itself. Any slippage 
will normally be because the clutch is worn out, or much less often, the 
clutch master cylinder pedal rod is not allowing the vent hole in the 
master cylinder to open.

Peace,
Pat


Thusly spake Tim, On 3/23/2011 12:47 PM:
> Is pitch black fluid alone in the clutch system enough to cause slippage?
>
> Thanks
>
> Tim
> ________________________________________
> Datsun-roadsters at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/datsun-roadsters/pat@hornesystemstx.co
m
>
>

-- 
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice		5026 FM 2001
Pat at HorneSystemsTx.com	Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
________________________________________
Datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/datsun-roadsters/9laser3@bright.net