[Roadsters] installing u20

[Tom Hendricksen]

Ken, the bolts on starter can be a bear, not to mention getting the starter
out and back in again.  I use about 3-4' of extensions and place the ratched
ahead of the left front suspension to remove and install the bolts.  It
makes things much easier.

Tom

69 2000 - Mr. Hyde
http://www.datsun2000.com
http://www.nowroc.org

 

On 8/17/2011 12:01:49 PM, dana nojima (noji-1 at pacbell.net) wrote: 
> Ken, 
> 
> Have it all together.  It is very painful to try to get the other bit 
> on after 
> the engine is in. 
> 
> 
> I think that the bolts on the starter can get 
> about a 32nd of turn due to all 
> the engine/frame restrictions. 
> 
> 
> I thought 
> that someone had a nice write up of the steps getting the engine 
> in/out. 
> Dana 
> 
> Dana Nojima 
> noji-1 at pacbell.net