[Roadsters] POR-15

[Stan Chernoff]

I don't think that there is any part of a roadster that can withstand 
4500F for even two minutes without melting or burning to a crisp.

Stan
==============

At 04:52 PM 10/8/2010, E Scanlon wrote:
>Some thoughts regarding the difference between powder coating and 
>POR that many ignore or may not be aware of.
>
>ANYTHING you have powder coated MUST be able to withstand 4500F for 
>an EXTENDED period of time in order for the powder coating to adhere 
>and flow out properly.  If it does not reach that temperature for 
>the required period of time, then the effectiveness of the coating 
>will be compromised accordingly.  POR is applied at room temperature.