[Roadsters] POR-15

[Lee Ehinger]

Personally  I can not endorse it more...

If the metal is prepped correctly, as noted by POR, marine clean followed by
Metal Prep  - this is the best, hardest coating I have found.   I
sandblasted, followed directions and coated my 70 240z suspension parts,
internal frame rails, gas tank etc.  I also then coated it with Chassis coat
as it is UV susceptible.  So far I have used approx 1 1/2 gallon.

Another friend (Eric Issacson - I think he is still on the list) did his
1600 frame (even inside) and suspension.  I plan to do the same.

Lee Ehinger
70 240z
67.5 2000
Ft Wayne IN
-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of
lmflaming at comcast.net
Sent: Friday, October 08, 2010 8:06 AM
To: Roadster List
Subject: Re: [Roadsters] [Shop-talk] POR-15 Dealers

I would like opinions on this please. I am going to do a ground up resto on
my
60 roadster and want to sandblast and either powder coat or use por-15 on
it.
I have used Por-15 before and have 3 quarts lefts to use. Should I plan on
using one of these ideas on most of the suspension parts for protection but
mostly looks. I want this car to be as original as possible but what is
acceptable to ensure its value.

Larry
----- Original Message -----
From: "Tim" < tputland @charter.net>
To: "Shop Talk List" <shop-talk@ autox .team.net>, "Ronnie Day" < ronnie
.day@
gmail .com>, "Roadster List" <datsun-roadsters@ autox .team.net>
Sent: Friday, October 8, 2010 4:17:38 AM
Subject: Re: [Roadsters] [Shop-talk] POR-15 Dealers

I always order right from them. The stuff is expensive enough as it is
without
putting in a middle man. But don't try to use their website. The ordering
process is a PITA and the password recovery process flat doesn't work. At
least it has never worked for me. (I know damn well what i used as my PW,
but
can never get it to work.)

Tim
Dairyland Datsuns

---- Ronnie Day < ronnie .day@ gmail .com> wrote:

=============
Anyone know where I can pickup POR-15 somewhere between Austin and
DFW ? We're replacing the 2 x 8 decking in our trailer and I want to
spray the "pockets" at the front and back where the ends of the wood
rests.

--
Ron