[Roadsters] Beck Arnley Brake Hoses - don't fit.

[Tom Hendricksen]

I did research on these hoses a few years ago, and this Beck/Arnley brake
hose was listed as a cross reference for the hose I actually used.  Below is
the listing on my tech note on datsun2000.com.  I actually purchased and
installed the Bendix 77002, which went on without any problems.  I will
remove the reference to the Beck/Arnley hose from this list.

BECK/ARNLEY 073-1188

BENDIX      77002
Confirmed by installation These hoses are about 1" shorter than Nissan OEM
hoses.
There does not seem to be a problem with flex range.

RAYBESTOS 	BH36737

AUTO SPECIALTY 	FRONT / HB51100 -- REAR / HB-51320

Tom
69 2000 - Mr. Hyde
Portland
http://www.datsun2000.com
http://www.nowroc.org

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net]On Behalf Of peter
harrison
Sent: Saturday, January 02, 2010 5:01 PM
To: datsun
Subject: [Roadsters] Beck Arnley Brake Hoses - don't fit.


Bought the hoses below:

BECK/ARNLEY 073-1188



They don't fit - the width across the threads on the original is 9.5 mm and
the width across the threads on the Beck/Arnley is 9.92 - added to which the
pitch is different.



Any one had  a simlar experience - or conversely RECENTLY found a match that
WORKS



Thx



Peter (somewhat frustrated)
You are subscribed as tom at datsun2000.com

Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters