[Roadsters] valve cover gasket-silicone

[Jim In Virginia]

The old cork gasket will work just fine if you soak it in a pail of water for
a day or so, and then smear a little grease on both edges before installation.



Best Regards,

Jim



Chesapeake, Va

67 pushrod 2L 5spd

66 parts car

72 sportwagon project

96 Miata "M" with flyin Miata stage 2.5 suspension (daily driver)





> To: datsun-roadsters at autox.team.net
> Date: Sun, 28 Feb 2010 11:21:14 -0500
> From: ljordan704 at netscape.net
> Subject: [Roadsters] valve cover gasket-silicone
>
> Asposted on the 311 list here is a silicone valve cover gasket on EBAY,but
> also you can get it from the manufacturer direct for a 10% discountif you
use
> the word"Datsun" on the form.
>
http://cgi.ebay.com/ebaymotors/Datsun-Roadster-Fairlady-Silicone-Valve-Cover-
>
Gasket_W0QQcmdZViewItemQQhashZitem1e5aa69424QQitemZ130369885220QQptZMotorsQ5f
> CarQ5fTruckQ5fPartsQ5fAccessories
>
> and
> www.gasketinnovations.com
>
> Linda
> No connection to seller
> ________________________________________
> Datsun-roadsters at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/wrenchorhammer@live.co
m

_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/201469228/direct/01/