[Roadsters] Caliper rebuild

[Dan Kroninger]

Yeah, that would help.  I had my wife step on the pedal.  It is pouring down
the brake bracket at the bottom of the caliper.  The lines, block and bleeder
are all fine.  It is definitely coming from inside the cylinder.Dan

From: poontang188 at hotmail.com
To: d_kroninger at hotmail.com
Subject: RE: [Roadsters] Caliper rebuild
Date: Fri, 23 Apr 2010 19:38:18 -0400








Dan:



Exactly where is the fluid coming out?



Brake pipe on the caliper cylinder?

If yes, which one - inner / outer ' bleeder screw?

Brake hose on the brass backing plate block?

Other?

Scott Sheeler
http://thedatsunroadsterbook.com/




> From: d_kroninger at hotmail.com
> To: datsun-roadsters at autox.team.net
> Date: Fri, 23 Apr 2010 18:05:32 -0500
> Subject: [Roadsters] Caliper rebuild
>
> I have just rebuilt my brake calipers. The first three I got back together
> with moderate problems, but all hold fluid. I finished the last one today,
and
> everything went together perfectly, but as soon as I step on the pedal,
brake
> fluid comes pouring down the back of the brake bracket. Do I need to
rebuild
> the caliper again? I have all the old parts, but no new rubber. Is there
> anything else this could be?
>


_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID2832
6::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4