[Roadsters] Console removal

[peter harrison]

Looking at my denuded 1970 - there are 4 screws holding the body of the center
console onto the transmission tunnel and screws on each side of the radio
console that hold it in, the back ones go to a bracket on each side that fits
into the dash. Apart from dsconnecting the antenna jack and the power, it
should slide out reasonably easy., though you might have to remove the shifter
- or at least the knob.



Peter (TOAD SAN)

> From: aultgc at att.net
> To: greydog300zx at yahoo.com; datsun-roadsters at autox.team.net
> Date: Sun, 22 Nov 2009 00:30:03 -0600
> Subject: Re: [Roadsters] Console removal
>
> Dan,
>
> I presume you're talking of a high-windshield car?
>
> Gary
> ----- Original Message -----
> From: "dan russell" <greydog300zx at yahoo.com>
> To: <datsun-roadsters at autox.team.net>
> Sent: Saturday, November 21, 2009 10:58 PM
> Subject: [Roadsters] Console removal
>
>
> > I'm trying to remove the console (both the radio section and the rear
> > section).
> > I've removed the screws holding the radio console section in and two small
> > screws that were in the console glove box. I've removed the shift plate.
> > It appears that I must remove the rear section before the radio section
> > can be slid back and out. It seems loose (rocks side to side) but I can't
> > lift the rear section by the rear shelf.
> > There's gotta be something else holding it in. What am I missing?
> >
> >
> >
> >
> > Thanks, Dan
> > ________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > You are subscribed as aultgc at att.net
> >
> > Datsun-roadsters mailing list
> >
> > http://www.team.net/archive
> >
> > http://autox.team.net/mailman/listinfo/datsun-roadsters
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as granvillecomputing at hotmail.com
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters