[Roadsters] What kind of glue?

[Gary and Cindy Ault]

Enrique,

By "welting" I presume you mean the aluminum trim which serves as
scuff plates to protect the edge of the weatherstrip in the door opening.
Gary



________________________________
From: E Scanlon <escanlon at wa-net.com>
To: KCook94722 at aol.com; datsun-roadsters at autox.team.net
Sent: Wed, November 4,
2009 10:11:20 PM
Subject: Re: [Roadsters] What kind of glue?

As others have
mentioned the 3M Weatherstrip glue works excellently.  This will work to hold
the bulb gasket to the door opening's metal edge.  But IIRC, the final piece
is a strip of Welting that clamps the overlap of material to the door.

Just
be sure to mount the OEM bulb gasket edge over your vinyl material before you
apply the welting.

FWIW
Enrique


----- Original Message ----- From: <
Sent:
Wednesday, November 04, 2009 1:46 PM
Subject: [Roadsters] What kind of glue?
> Found a set of NOS door weather-stripping in my parts stash while searching
> for another part.WOOHOO! Needed replacement badly on my current project and
> I had completely forgotten that I had them. My question is, what type of
>
adhesive is recommended when installing them? Looks like a good portion of it
> is held in place by trim parts but not all of it. Anyone have suggestions on
> what works best?
> Ken 
________________________________________
Support
Team.Net  http://www.team.net/donate.html

You are subscribed as
aultgc at att.net

Datsun-roadsters mailing list

http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters