[Roadsters] front suspension and brake bolts

[Eddie]

Pat,

What about McMaster's bolts? 

Eddie

Pat Mahoney wrote:
> Tim,  I used to sell bolt packs.  There is a complete listing  at the 311s.org
> site in the PMWIKI section.  Look under Restoration tips, then Frame bolts,
> What size bolts do our little cars take.  The caliper bolts are 1/2-20X 1-1/4"
> with lock washer 4ea.  I highly recommend against buying bolts from Home Depot
> and most local hardware stores.  There is a tremendous amount of counterfeit
> gr.8 fasteners in the market place.  A quality supplier should be able to
> provide you with lot traceability and certification that it meets specs.  Hope
> this helps   Pat Mahoney '69 sr20 project
>
>   
>> Date: Sun, 29 Mar 2009 14:09:00 -0700
>> From: tputland at charter.net
>> To: datsun-roadsters at autox.team.net
>> Subject: [Roadsters] front suspension and brake bolts
>>
>> I am thinking that I want to use new bolts for the brake pistons and
>>     
> suspension spindles when I put the new/refurbished parts on my 1600 this
> spring.
>   
>> I did some searching on the 311.org site but didn't find any thing regarding
>>     
> caliper bolts.
>   
>> A couple people out there sell bolt kits. Does either have the bolts for the
>>     
> front brakes and/or suspension? Or does any one know where else I might buy
> these bolts?
>   
>> Or is my best bet to try the hardware store?
>>
>> TIA
>>
>> Tim
>> Belleville, WI.
>> '70 SPL AND SRL
>>
>>     
> _________________________________________________________________
> Express your personality in color! Preview and select themes for Hotmail..
> http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_
> WL_HM_express_032009#colortheme
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as eddietude at socal.rr.com
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters