[Roadsters] Frustrated over brakes

[Walter Peterson]

OH PLEASE!  I've seen hubs get bent or damaged with big hammers.
Take the assemblies to your local parts store or other shop that has a
hydraulic press. The press will put a nice even & constant pressure on the
hub center to ease the pieces apart.

It feels so good on release! :)


Walter Peterson
Goleta Ca, 93117
Street driven race motor
2000 3-Main(R) Solexes,cam etc.
5-Speed & LSD.


-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of Brian Hollands
Sent: Thursday, March 05, 2009 12:12 PM
To: 'datsun-roadsters:autox.team.net'
Subject: Re: [Roadsters] Frustrated over brakes

Don't hit it with anything.
The proper tool is a press.  If you don't have one, a machine shop will.
Take the whole assembly to the guy who's machining the rotors and let him
press the hub out of the rotor.

Brian H
69 2000
Tampa, FL

________________________________
You are subscribed as walter.peterson at cox.net

Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters