[Roadsters] Flywheel bolts needed for a U20

[Gary and Cindy Ault]

Dave,

These are pretty special bolts -- they have a small-diameter head which 
requires a 10mm hex drive.  (I bought mine from Snap-On.)  The spacing looks 
to be too tight for a conventional hex-head bolt.  And, since the U20 has a 
12-bolt main, I presume they're high-strength.  I'd check with Nissan first, 
then with the usual suppliers.

Gary

----- Original Message ----- 
From: "dave" <daveandlindab at comcast.net>
To: " Datsun-Roadsters at Autox. Team. Net" <datsun-roadsters at autox.team.net>
Sent: Tuesday, June 02, 2009 9:02 PM
Subject: [Roadsters] Flywheel bolts needed for a U20


>I just realized I have an engine and a flywheel, but no bolts.  Defiantly
> NOT a part to play around with.  Does anyone have a source or the specs 
> for
> these?
>
>
>
> Thanks
>
> Dave Brisco
>
> ECR
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as aultgc at att.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters