[Roadsters] Carbs, distributor

[Roger Kersch]

I am ready to start the 66 w pertronix, correct springs, 7.5 cam and  
while checking around see that the oil damping of rear carb is  
significantly more than the front. Same ATF in both. I changed damper  
rods and oil again to no effect. I have 2 other sets carbs, I guess I  
will change out pistons. I did not mix up with the others because of  
'Z' needles they had. Anybody have similar experience/remedy? Thanx on  
distributor advice, that came together well
Sent from my iPhone