[Roadsters] Brake Master Cylinder alternatives

[Dewey Hahlbohm]

Eddie, I had a 510 master in my 2000, worked fine until I mounted the Mikuni carbs, then the clearance became an issue.  The 510 master is longer than the roadster master and I was unable to install that way.  I had to remove the 510 master and replace it with a roadster master.  Other than that, the 510 master worked great.  I am not aware of any other clearance issues.  Good luck, Dewey 



-----Original Message-----
>From: Eddie <eddietude at socal.rr.com>
>Sent: Apr 23, 2009 9:18 PM
>To: Datsun Roadster List <datsun-roadsters at autox.team.net>
>Subject: [Roadsters] Brake Master Cylinder alternatives
>
>Hi all,
>
>I've checked the 311s site, and there is some info on using a 510 master 
>cylinder in the wiki section.  Someone else talked about using a 280Z 
>master cylinder as well.
>
>Since I'm not comfortable with the single reservoir system, can anyone 
>tell me what master cylinders work?
>
>Are those the only two?
>
>What about clearance issues? 
>
>Thanks.
>
>Eddie
>________________________________________
>Support Team.Net  http://www.team.net/donate.html
>
>You are subscribed as hahlbohmd at earthlink.net
>
>Datsun-roadsters mailing list
>
>http://www.team.net/archive
>
>http://autox.team.net/mailman/listinfo/datsun-roadsters