[Roadsters] Datsun - Can't figure it out

[dave]

Only thing I would add is if you can't get a decent idle, make sure the
float height is good and the step on the jet is flush with the piston.  

Dave Brisco
ECR

-----Original Message-----
From: Keith0alan at aol.com [mailto:Keith0alan at aol.com] 
 
In a message dated 5/12/2008 2:11:17 P.M. Pacific Daylight Time,  
gtpjimgammon at yahoo.com writes:

Does anyone have a picture of the lower part of a SU carb on a  2000
that shows the position of the knurled mixture knob with  the mixture
about right?

I just want to  have some faint idea of where it should be to start. I
can  adjust after that.

Jim



Jim,
 
    Turn it all the way in then out one turn. That  should be close.
 
keith