[Roadsters] help carb and exhaust mounting

[dave]

You can get a hardware kit fir a reasonable price on Ebay, Datsun Parts
Express.  It's nice to have the right stuff if yours is a mish-mosh. The
correct hardware is a 12mm wrench size, "normal" nuts in that bolt size
are 13mm.  IIRC, mine has lockwashers.

Dave
ECR

-----Original Message-----
From: Joe Kinstle [mailto:joek at camberconstruction.com] 
Sent: Friday, March 21, 2008 6:55 PM
To: toolmansj2 at comcast.net; 'roadster list'
Subject: Re: [Roadsters] help carb and exhaust mounting

You can double nut the stud and back it out.  Not sure if you need the
lock
washer, but it hasn't hurt anything on my motor.

Joe Kinstle
'68 2L
BLK SRL

-----Original Message-----
From:
datsun-roadsters-bounces+joek=camberconstruction.com at autox.team.net
[mailto:datsun-roadsters-bounces+joek=camberconstruction.com at autox.team.
net]
On Behalf Of toolmansj2 at comcast.net
Sent: Friday, March 21, 2008 3:19 PM
To: roadster list
Subject: [Roadsters] help carb and exhaust mounting

Do I need to use lock washers along with the big thick flat washers
seems
there would barely be enough room for locks.
thanks Shaun

--
1969 2000 U20 
2007 Titan 4x4