[Roadsters] 240Z rear brake drums fit? (was "Re: A few questions")

Bubba bubwin at mts.net
Thu Mar 13 08:25:03 MST 2008


Most Speed Shops sell what you need.  They are known as a wheel spacers or 
wheel adapters.  The advantage of wheel adapters is you can actually change 
the bolt pattern to fit those wheels you found on e-bay, but don't fit the 
Datsun bolt pattern.  Check out these links to the Jegs website..

Baer Brake
http://www.jegs.com/p/Baer+Brake/759919/10002/-1/11611

Jegs
http://www.jegs.com/p/JEGS/957104/10002/-1/11611

Mr Gasket
http://www.jegs.com/p/Mr.+Gasket/748902/10002/-1/11611

Cragar
http://www.jegs.com/p/Cragar/762802/10002/-1/11611

Trans Dapt
http://www.jegs.com/p/Trans+Dapt/811892/10002/-1/11611

No need to re-invent the wheel so to speak.

Bob Winslade
1966-1600 Missy
1967-1600 Bender


----- Original Message ----- 
From: "Mike H." <twobeaners at earthlink.net>
To: "Pete Peters" <ppeters914 at comcast.net>; 
<datsun-roadsters at autox.team.net>
Sent: Wednesday, March 12, 2008 5:07 PM
Subject: Re: [Roadsters] 240Z rear brake drums fit? (was "Re: A few 
questions")


> This subject came up at a good time for me. I need new ones and I'm 
> thinking
> of going to these
> drums also. Does anyone have these adaptor plates already made up? I could
> consult my local machine shops to make them, but I thought I would check 
> the
> list.
> Mike Hudson - Stroker / 5-Speed
>
> ----- Original Message ----- 
> From: <ppeters914 at comcast.net>
> To: <datsun-roadsters at autox.team.net>
> Sent: Tuesday, March 11, 2008 2:03 PM
> Subject: [Roadsters] 240Z rear brake drums fit? (was "Re: A few 
> questions")
>
>
>> I did a quick Search in the 311s.org forums on "240Z drum*". Found 11
> matches, but this should answer your basic question:
>>
>> "The Z drums will bolt right up with out any modifications using an
> adapter plate which contains the correct boss and counterbore on the
> backside. I'm going to get the pair of adapters machined on the lathe in 
> the
> new year."
>>
>> Here's a link to a drawing of the adapter:
>>
>> <http://www.311s.org/pmwiki-311/pmwiki.php?n=TechSection.240zModDrawing>
>>
>> Early roadsters had steel drums. To use the 240Z drums, you need to 
>> modify
> or replace the backing plates.
>>
>> Pete "no running roadster, but quick with Search!"
>> [snip[
>>
>> > Second, does anyone know if the rear aluminum drums are the same as on
> an
>> > early 240Z?  Saw some on Craigslist and thought about picking them up.
>>
>> > Thanks!
>> > Greg Burrows
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as bubwin at mts.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters


More information about the Datsun-roadsters mailing list