[Roadsters] Water Pipe

[Pete Peters]

What water pipe are you talking about?

Pete

 -------------- Original message ----------------------
From: "JohnnyRoadster" <JohnnyRoadster at comcast.net>
> hanks for the info Keith.  I have pipe sitting around, so I may try to
> fabricate something to see how it looks.
>   ----- Original Message -----
>   From: Keith0alan at aol.com
>   To: JohnnyRoadster at comcast.net ; datsun-roadsters at autox.team.net
>   Sent: Saturday, July 26, 2008 9:40 AM
>   Subject: Re: [Roadsters] Water Pipe
> 
> 
>   With water in it the temp will never get hot enough to melt solder. I've
> seen copper ones before and they seem to have worked fine.
> 
>   keith
> 
>   In a message dated 7/25/2008 5:10:08 P.M. Pacific Daylight Time,
> JohnnyRoadster at comcast.net writes:
>     I cleaned mine off the other day, and it was in OK shape.  But I was
> thinking
>     of just making one out of copper pipe and bending it at one end with a
> pipe
>     bender, and the sweating a 'T' and bend the other end.  This would be
> close to
>     the same shape as an original.
> 
>     My question is, how hot does it get above the exhaust manifold where this
>     would be?  This idea would only work if it didn't get too hot to melt the
>     solder.
> 
> 
>     SPL311-19356
>     http://community.webshots.com/user/johnnyroadster
>     ________________________________________
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as ppeters914 at comcast.net
> 
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters