[Roadsters] Fw: Studs too short for new Panasports

[hallosb at juno.com]

Mike,
Please, share the installed length of the stud.  I'm running 15" Panasports
with stock studs and never really thought much about it.  Seemed like I was
catching plenty of thread. The nuts are tapered to catch additional thread.
When I measure from the hub on the front or the drum on the rear, I get 7/8"
of stud sticking out.  If this isn't enough thread, looks like I should pick
up some new studs also.
Dan McHatton
'66 1600
-------------------------
Moser 7/16" - 20 x 1 3/4" and the same made by Dorman, with the right knurl
diameter as compared to the new Nissan ones I have left over.

_____________________________________________________________
Make up to $100/hour by getting a Sports Medicine Degree. Click Now!
http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3oLy9cWEaZ9uhDwv5l25KbV0ZC8
eMBwUGRacTChoRH3ufjLI/