[Roadsters] Alternator w/ regulator

[dave]

I did a GM conversion also, but I left the alternator on the drivers side.
Plenty of room, no fabrication.  Just need a longer belt. I used a Corvette
alternator, slightly larger deep groove pullyWas very easy, follow the
instructions on 311's and elsewhere.  I can send some pics taken while I did
it if anyone wants

Dave Brisco
 ECR
-----Original Message-----
>
> Hello everyone,
> I'm having electrical problems with my 70 1600 where the battery isn't
> being recharged. I had my alternator rebuilt and the regulator changed
> and was working good for about 2 months then died. I had the
> alternator tested and it is only putting out 12.3 volts or so at idle
> and does not reach 13.5 until about 2700 rpm. I figure it is a bad
> rebuild or faulty regulator. I would rather get a stronger alternator
> with a built in regulator but don't know of any. Does anyone know of
> any that will fit with minor or no modification? Also what do they go
> for?
>
> Thank You
> Rick Celi70 1600