[Roadsters] battery cable help

[ppeters914 at comcast.net]

I just bought a pre-made 4-gauge cable from Schucks (one of my local auto parts chains). No need to fabricate anything. Don't remember the length....might have been 40, 42 or 48 inches.

Pete

 -------------- Original message ----------------------
From: "Gordon Glasgow" <gsglasgow at comcast.net>
> If you have the time, you might also check the salvage yards for welding
> cable. They sell it by the pound. I used #0 cable for mine, since I was
> putting the battery in the trunk.
> 
> Gordon Glasgow
> Renton, WA
> 
> -----Original Message-----
> From: datsun-roadsters-bounces+gsglasgow=comcast.net at autox.team.net
> [mailto:datsun-roadsters-bounces+gsglasgow=comcast.net at autox.team.net]On
> Behalf Of toolmansj2 at comcast.net
> Sent: Friday, January 18, 2008 8:54 AM
> To: roadster list
> Subject: [Roadsters] battery cable help
> 
> 
> Does anyone know the length of wire I need to build a positive battery
> cable. I will also build a negative cable with the same wire. I did not get
> a positive cable with my car and plan on buying some at lunch time today. I
> plan on using #4 welding cable and it is quite expensive like $4.25 a foot.
> This is what they sell at the auto store close to my work. Any advice?
> 
> --
> 1969 2000 U20
> 2007 Titan 4x4
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as ppeters914 at comcast.net
> 
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters